300m Electric Dog Training Collar Pet Remote Control Waterproof Rechargeable With LCD Display For Dogs Bark Stop Dog Collar
Function description:
The main functions of the product: flashlight, sound, vibration (level intensity can be adjusted), electric shock (level intensity can be adjusted), support a remote control can link two receivers (A/B), the actual distance of wireless remote control is about 250 meters. Theoretical distance 500 meters
Three modes of independent channel and key lock function:
A channel (parameters can be set independently)
B channel (parameters can be set independently)
A+B common channel (parameters can be set independently)
The key lock function is activated by long pressing for 3 seconds. After the key lock function is activated, the remote control does not emit a signal, and only the battery icon and the key lock icon are displayed on the display.
The adjustable level of electric shock and vibration is 0-99, and there is only one sound, no level
Flashlight function Long press for 3 seconds to turn on the flashlight, short press to turn off the flashlight
Pairing method of remote control and receiver:
Step 1: Activate the remote control, select the current A or B or A/B public channel to be paired.
Step 2: When the receiver is off, press and hold the switch button for 3 seconds, the receiver emits 2 beeps, and then the LED signal light flashes for 10 seconds.
Step 3: Press any key (sound, vibration, electric shock) on the remote control within 10 seconds of the fast flashing of the LED signal light of the receiver, and the pairing will be successful. The current public channel of A or B or A/B will be sent out. 2 sounds.
When the remote control selects the A/B common channel to pair the receiver, then when the remote control is adjusted to the A or B channel, it will send out a signal, and the receiver can also receive the signal
Method of turning on and off:
Power on: Short press the switch button, the receiver will beep 1 beep to indicate that it has been turned on
Shut down: long press the switch button for 3 seconds, the receiver beeps 2 to indicate that it has been shut down
Method of receiver battery display:
In the power-on state, press for a short time to display the current battery level of the receiver.